PERMITS ISSUED DURING WEEK ENDING: JUNE 26, 2020.
The Arkansas Oil and Gas Commission last week issued one drilling permit and six well recompletions. By county, they were:
DRILLING PERMITS
SEBASTIAN -- Oxley Energy, LLC of Fort Smith for Gilmore 2. in Middle Atoka Form. of B-44 Fld. Drilled to TVD: 4900 ft. perf. 2730 ft. FSL &2031 ft. FWL of Sec. 1-6N-32W. Contractor: Virtue Oilfield Rentals, LLC; workover done June 28.
WELL RECOMPLETIONS
COLUMBIA -- Mission Creek OPCO LLC of Magnolia for DMCVU No. 83, 24-hr. prod. not available in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to TD: 7,190 ft., perf. 6,716-7,020 OA ft. of Sec. 15-18S-22W. Workover done March 26.
Mission Creek OPCO LLC for DMCVU No. 97, 24-hr. prod. 1.7 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to 8,622 ft., perf. 6,662-8,504 OA ft. of Sec. 15-18S-22W. Workover done April 23.
Mission Creek OPCO LLC for DNCVU No. 59, 24-hr. prod. 6.6 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to 8,630 ft., perf. 7,031-7,053 OA ft. of Sec. 11-18S-22W. Workover done April 23.
Mission Creek OPCO LLC for Phillips-Caldwell No. 6, 24-hr. prod. 3.37 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to 8,565 ft., perf. 7,066--7,074 ft. of Sec. 18-18S-21W. Workover done April 1.
Mission Creek OPCO LLC for Willis C No. 6, 24-hr. prod. 9.43 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled to 8,780 ft., perf. 8,158-8,173 ft. of Sec. 17-18S-21W. Workover done March 31.
Mission Creek OPCO LLC for Snider Wise A' No.1, 24-hr prod. 8.34 bbls in Cotton Valley Form. of Dorcheat Macedonia Fld. Drilled To TD: 8,670 ft., perf. 6,830-6,842' of Sec. 20-18S-21W. Workover done March 20.
ABBREVIATIONS
Loc. -- location; Perf. -- perforations; FEL -- from the east line; FNL -- from the north line; FSL -- from the south line; FWL -- from the west line; FEUL -- from the east unit line; FWUL -- from the west unit line; FNUL -- from the north unit line; FSUL -- from the south unit line; MCF -- thousand cubic feet; bbl -- barrel; MD -- measured depth; TD -- total depth; TVD -- true vertical depth; PBTD -- plug back total depth; BHL -- bottom hole location; PBHL -- proposed bottom hole location; SHL -- surface hole location; OA -- overall; N/A -- not available.